|
|
Laing Recric Pump - Model ACT-303-BTW
Under Sink Automatic Recirc Pump
|
How The System Works:
The pump is installed under the sink or faucet farthest from the water heater -- where hot water usually takes
the longest amount of time to arrive.
A built-in temperature sensor automatically turns the pump on when the water temperature in the hot water supply line cools down to 85º F. This cool water in the hot water supply line is then pumped into the cold water line and back into the water heater.
The pump turns off automatically when the hot water supply line to the faucet reaches 95º F, ensuring the instant availability of shower warm water with maximum temperature hot water only seconds behind. When the pump is automatically turned off by the built-in thermostat, an auto closure device prevents hot or cold water from mixing in either supply line.
Hot water will also be instantly available at all other faucets in the supply line between the water heater and the faucet where the pump is installed.
The Under-Sink Instant Hot Water Pump System...
- does not require a return line.
- requires only 33 watts of power.
- comes complete with a 6 ft. long power cord.
- requires only one pump and one installation for all fixtures on the hot water plumbing line.
- has built-in fixed thermostat or an optional, adjustable thermostat.
- saves the average family of four up to 17,000 gallons of water annually.
- is silent during operation.
- saves energy, money, water and pays for itself in a short period of time (see energy saving chart).
- has a built-in 24 hour timer which allows the selection of system operating periods to suit family usage.
Typical Layout of Laing ACT-303-BTW Hot Water Pump System
Save Money with Laing ACT-303-BTW Hot Water Pump System
Calculations based on: Water cost= $2.02/100ft3. Sewer surcharge = $ 1.35/100ft3. Notes: Use of insulated copper supply line on Autocirc system would result in additional savings. Actual savings may differ from household to household depending on a variety of factors incl. water use habits, length of hot water supply line, number of home occupants, etc. Above summary based study and analysis prepared by Edward Saltzberg and Associates, Consulting Mechanical Engineers. Copies of this detailed analysis are available on request from Laing Thermotech, Inc.
|
|
Laing AutoCirc1 ACT-303-BTW Techs & Specs
Laing AutoCirc1 ACT-303-BTW Install Manual
Laing AutoCirc FAQ's
Laing Warranty
|
