Return to Decor Main Page
Hot Water Heaters - Electric - Propane - Natural Gas - Tankless - Instant Hot Water! Water Heaters
Stainless Steel Vent Pipe Vent Pipe
Radiant Heating Supplies - such as PEX tubing and more... Radiant Heat
PEX Tubing PEX Tubing
Gas Fireplaces, Gas Stoves, Gas Inserts and Fireplace Accessories Gas Fireplaces
Wood Stoves, Wood Inserts and Stove Accessories Wood Stoves
Propane and Natural Gas Room Heaters Gas Space Heaters
Baseboard Heat, Electric Wall Heaters, Electric Toe-Kick Heaters and more... Electric Heaters
HVAC HVAC
Whole House Fans House Fans
Hydronic Fan Convectors and Heating Unit Fan Coils Fan Convectors
Hydronic Heating Supplies Heating Supplies
Plumbing Supplies - such as Plumbing PEX, Filters and more... Plumbing Supplies
Propane, Natural Gas, Oil and Electric Boilers Boilers
Myson Radiators, Hydronic Fan Convectors, Toe-Kick, Kick-Space Heaters, Baseboard Heat and more... Radiators
Bath and Kitchen - Faucets, Fans, Sinks and more! Bath & Kitchen
See our Solar Page Solar
Foil Insulation, Cable Railing Systems, Ditra Underlayment, Work Lights and Flashlights Misc
Save Energy, Save Money, Save Time, Save Water, Save the Environment! Save Energy




HACKER SAFE certified sites prevent over 99.9% of hacker crime.
Decor Style Baseboard Radiators
Hydronic Hot Water heating systems provide the ultimate in comfort.
All Myson Decor Radiators are manufactured and tested to BS EN 442.
Every radiator carries the BS Kitemark, which certifies independent approval of heat output and verifies production under a quality system to BS EN ISO 9002.

OPERATING PRESSURES
Every radiator is pressure tested at 87 psi and is suitable for working pressures up to 66 psi.

PAINT FINISH
Every radiator undergoes a multi-stage pre-treatment process followed by an epoxy polyester primer coat. An epoxy polyester powder coat in white (RAL 9003) is applied to all front and rear surfaces allowing the Myson Decor Radiators to be fitted without further painting.

APPLICATION
Myson Decor Radiators are for use on two pipe pumped indirect domestic and commercial central heating installations, with a maximum working temperature of 212°F. The system should be designed with particular care taken to avoid air entry or water discharge.
We do not recommend the use of single feed indirect cylinders, as the possibility of aeration due to water interchange may lead to corrosion.
The installation work must be carried out in accordance with recognized good practice, and precautions taken to avoid contamination which could lead to corrosion. If a corrosion inhibitor or other water treatment is to be used, the manufacturer’s instructions must be strictly followed.

CONNECTIONS
All Myson Decor Radiators are fitted with four 1/2 inch connections. An air vent and plug are packed with every radiator.

MOUNTING BRACKETS
All radiators are supplied with concealed wall mounting brackets to accommodates different wall construction details. The brackets include plastic inserts to minimize noise caused by the expansion and contraction of the radiator.
Decor Panel Radiator Tech, Specs and Install Manuals