|
|
|
Model
|
Btu
high/low *
|
Your
Cost
|
Change quantity in your Shopping Cart.
You can always remove items later.
|
Myson Whispa 50 Hydronic Toe-Kick Space Heater
3.5 X 16 1/4 by 7.5"
|
2,754/3,167
|
$169.95
|
|
Myson Whispa II 5000 Hydronic Toe-Kick Space Heater
4 X 18.5 by 12 1/8"
|
4,247/5,310
|
$209.95
|
|
Myson Whispa II 5000 EZ Hydronic Toe-Kick Space Heater
Includes EZ-Hose Kit
4 X 18.5 by 12 1/8"
|
4,247/5,310
|
$249.95
|
|
Myson Whispa II 9000 Hydronic Toe-Kick Space Heater
4 X 22.5 by 16"
|
8,639/10,431
|
$279.95
|
|
Myson Whispa II 9000 EZ Hydronic Toe-Kick Space Heater
Includes EZ-Hose Kit
4 X 22.5 by 16"
|
8,639/10,431
|
$309.95
|
|
|
Myson Optional Low Cut-out 109-on and 91-off **
|
$9.00
|
|
Myson EZ Hose Kit
two 30" hoses with 1/2" Compression Fittings & Ball Valves
Will work with the Whispa 50
|
$89.95
|
|
Replacement Motors for Myson Toe-Kick Heaters
For all the Myson Toe Kick Space Heaters above
|
Mono Flow Tees and Elbows for Installing Toe-Kick Heaters
This will bring you to another page - use your browser back button to get back to this
page
or click on the Radiator link on the left of most pages to navigate back to this page
|
*Represents entering temperature of 180 degrees. Click
here for chart on incoming water temperature versus rated btu/hr heat output.
Flow Rates of between 1 GPM and 3 GPM.
**Myson Fan Convectors come with a standard Cut-out that will turn the fan
on at 129 degrees and off at 109 degrees. It is suggested that if you use a water
heater as your heat source or your heat source is below 140 degrees you should use
the optional Cut-out which is set at 109-on and 91-off.
|
|