|
|
Myson Fan Convectors - Model CSU Buy Page
Myson Hydronic Fan Convectors using a hot water heat source
|
Represents entering temperature of 180°F.
Click here for chart on incoming water
temperature versus rated btu/hr heat output.
**Myson Fan Convectors come with a standard Cut-out that will turn the fan on at
129°F and off at 109°F. It is suggested that if you use a water heater as your heat source
or your heat source is below 140°F - use the optional Cut-out which is set at 109-on and
91-off.
|
|