|
|
QMark QFG Electric Wall Space Heater
Electric Fan Room and Space Heater
|
QFG Series electric space heaters are suitable for use in almost any room. Qmark QFG
Electric Wall Heaters are efficient and do not take up any floor space as they are installed
in the wall and use a wishper quiet fan to move air around the room.
Use single wall heaters in smaller rooms such as bedrooms and bathrooms. Use multiple
space heaters (controlled by a single thermostat) in larger rooms such as living rooms
and family rooms. Wattage should be determined through heat loss calculations.
- Dual Protection: Thermal cutout with indicator light and one time thermal fuse
- Tangential blower for whisper quiet operation
- White baked enamel finish
- Hard wired
- Open coil element assures quick heat and low maintenance
- Three piece construction for ease of installation
- Permanently lubricated, dust protected bearings
- Wall Can Size: width 14-3/8" x height 6-5/8" x 4 3/8" depth
- Grill Size: width 16-7/8" x height 7-3/4" x depth 3/4"
- Built-In Thermostat
See a large picture of the Qmark QFG Wall Heater (click me)
What Size QFG Electric Space Heater do you need? (Click Here)
CLIP-N-FIT® FEATURE
Patented Clip-N-Fit® feature (US Patented No.
6,172,343) allows the installer to change the wattage of the heater to a lower
output without moving jumper wire. Each QFG electric wall heater is factory wired for its maximum
wattage. To change wattage, clip out either jumper 1 or 2 as shown in the
installation manual for desired wattage. This patented Clip-N-Fit® feature
also prevents the operator to change wattage after installation to a higher wattage.
Qmark QFG Electric Wall Fan Heater Install Manual and Tech Info
|
|